1. Cut the lengths of KlimaTec KV 600 leaving a surplus and roll up with the underside facing outwards.

2a. With smooth to medium textured base surfaces, generously roll ERFURT System Adhesive SR2 along the lengths using a long-pile roller onto the base surface.

2b. With medium to coarsely textured base surfaces, evenly apply ERFURT System Adhesive SR4 directly to the base surface along the lengths with a toothed trowel, either B2 or C3 depending on the base surface, perpendicular to the strips of paper.

3. Lay the lengths of wall covering butt jointed to each other into the wet ERFURT System adhesive using the wall adhesion technique. Press down with a rubber roller and/or a plastic trowel.

4. Trim off excess wallpaper at the corners and edges and butt joint the next length up to it.

5. Trim off excess material with a Stanley knife and palette knife where it meets the ceiling, skirting boards or windows.

6. Once dry, the KlimaTec KV 600 can be wallpapered over. Slide the butt joints sidewards to prevent the seams sitting upon each other.