1.a Apply the paste by hand: cut the lengths at wall height plus additive and paste individually. Or

1b. Paste using the pasting device: draw lengths through the pasting device and cut off.

2. The pasted lengths are folded 2/3 to 1/3. Do not bend loops.

3. Soaking time approx. 5-10 minutes.

4. Apply the lengths seam to seam and vertically. Press free of bubbles and folds with a wallpapering brush or rubber roller.

5. Trim carefully into corners etc. with scissors or by carefully tearing with the aid of a straight edge.

6. Do not overlap on external corners, trim to size to produce a butt joint.

7. After drying, paint with a good quality dispersion paint.