1. The base surface must be dry, clean, firm, absorbent and smooth. Mark width of the fabric on the wall and let fall a perpendicular.

2. Nonwoven fabric adhesive or special paste in the ratio 1:20 + 20% dispersion adhesive is used for sticking.

3a. Apply the paste by hand: cut the lengths at wall height plus additive and paste individually. Observe repeat.

3b. Paste using the pasting device: draw lengths through the pasting device and cut off. Observe repeat.

4. The pasted lengths are folded 2/3 to 1/3. Do not bend loops.

5. Let all the strips soak for the same amount of time: 10-15 minutes.

6. Stick Novaboss seam to seam. Press free of bubbles and folds with wallpapering brush or sponge roller.

7. In the corners, the separation is carried out with the wallpapering spatula and a cutter knife or with scissors.

8. On outer edges, the wallpaper is not applied overlapping, rather the separation is made exactly on the edge.

9. Following drying, we recommend a coat of high-quality latex paint. Use silk mat or silk gloss paints.